Copy Default - Kyocera Mita KM-4530 Service Manual

(4) Copy default

Exposure mode
Selects the exposure mode at power-on.
1. Select "Exposure mode" and press the
[Change #] key.
2. Select "Manual" or "Auto".
Exposure steps
Sets the number of exposure steps for the
manual exposure mode.
1. Select "Exposure steps" and press the
[Change #] key.
2. Select "1 step" or "0.5 step".
Original image quality
Selects the copy quantity mode at power-on.
1. Select "Original image quality" ("Image quality
Original") and press the [Change #] key.
2. Select "Text+Photo", "Photo" or "Text".
Custom original size (setting No. 1 - No. 4)
Sets the custom original sizes.
1. Select one of "Original size" settings ("custom
1" through "custom 4") and press the [Change
#] key.
2. Press the [On] key.
3. Press the +/- keys to set Y (width).
Setting range: 2 to 11" (inch specifications)
50 to 297 mm (metric specifications)
4. Press the +/- keys to set X (length).
Setting range: 2 to 17" (inch specifications)
50 to 432 mm (metric specifications)
Eco print
Selects the toner economy mode to be
automatically on or off at power-on.
1. Select "Eco print" and press the [Change #]
key.
2. Select "On" or "Off".
Paper selection
Sets whether the same sized paper as the
original to be copied is automatically selected.
1. Select "Paper selection"("Select paper") and
press the [Change #] key.
2. Select "APS" or "Default cassette".
Select paper type (APS)
Specifies paper types to be selected for the auto
paper selection mode.
1. Select "Select paper type(APS)" and press
the [Change #] key.
2. Press the [On] key.
3. Select the paper type. (Multiple types can be
selected.)
Default drawer
Sets the drawer to be selected in cases such as
after the reset key is pressed.
1. Select "Default drawer"("Default cassette")
and press the [Change #] key.
2. Select priority drawer.
Drawer for cover paper
Sets the drawer to be selected for cover paper.
1. Select "Drawer for cover paper" and press the
[Change #] key.
2. Select the drawer for cover paper.
Default magnification
Selects whether auto magnification selection or
100% magnification is to be given priority when
the sizes of the original and copy paper are
different.
1. Select "Default magnification"("Default mode")
and press the [Change #] key.
2. Select "Manual" or "AMS".
Auto exposure adjustment
Adjusts the exposure for the auto exposure mode.
1. Select "Auto exposure adj. (Auto)" and press
the [Change #] key.
2. Press the [Lighter] or [Darker] key to adjust
default setting of copy exposure.
Setting range: -3 to +3
Auto exposure adjustment (OCR)
Adjusts the exposure for scanning with OCR in
the scanner mode.
1. Select "Auto exposure adj. (OCR)" and press
the [Change #] key.
2. Press the [Lighter] or [Darker] key to adjust
default setting of copy exposure.
Setting range: -3 to +3
Manual exposure adjustment (Mixed)
Adjusts the exposure to be used when text and
photo original is selected for the image mode.
1. Select "Manual exp. adj. (Mixed)" and press
the [Change #] key.
2. Press the [Lighter] or [Darker] key to adjust
default setting of copy exposure.
Setting range: -3 to +3
Manual exposure adjustment (Text)
Adjusts the exposure to be used when text
original is selected for the image mode.
1. Select "Manual exp. adj. (Text)" and press the
[Change #] key.
2. Press the [Lighter] or [Darker] key to adjust
default setting of copy exposure.
Setting range: -3 to +3
2BC/D-1
1-4-3