Charge Erasing Section - Kyocera Mita KM-4530 Service Manual

2BC/D

2-1-7 Charge erasing section

The main component of the charge erasing section is the cleaning lamp (CL).
The cleaning lamp (CL) consists of 45 LEDs (red) and removes residual charge from the drum surface.
Cleaning lamp
Figure 2-1-33 Charge erasing section
EPCB CL
CL REM
CN4-11
Drum
Figure 2-1-34 Charge erasing section block diagram
IFM
150 ms
600 ms
CL
Timing chart 2-1-9 Charge erasing operation
a 150 ms after the start key is pressed, the cleaning lamp (CL) lights to remove the residual charge from the drum
surface.
b 600 ms after the image formation motor (IFM) turns off, the cleaning lamp (CL) turns off.
2-1-30