Kyocera Mita KM-4530 Service Manual page 88

Maintenance
item No.
U073 Checking scanner motors
Description
Simulates the scanner operation under arbitrary conditions.
Purpose
To check scanner operation.
Method
1. Press the start key. The screen for selecting an item is displayed.
2. Select the item to be changed. The selected item is displayed in reverse.
3. Change the setting using the cursor up/down keys.
Display
ZOOM
SIZE
LAMP
Original sizes for each setting in SIZE
Setting
8
9
24
36
39
40
41
4. Press the start key. The setting is set. Scanning starts under the selected conditions.
5. To stop operation, press the stop/clear key.
Completion
Press the stop/clear key when scanning stops. The screen for selecting a maintenance item No. is displayed.
Description
Operating conditions
Magnification
Original size
On and off of the exposure lamp
Paper size Setting
A4 42
B5 47
11" × 8
1
/ " 52
2
A3 53
B4 55
A4R 56
B5R 58
2BC/D-1
Setting range
25 to 400%
See below.
0 (off) or 1 (on)
Paper size
A5R
Folio
11" × 17"
11" × 15"
" × 14"
1
8 /
2
" × 11"
1
8 /
2
" × 8
1 1
5 / / "
2 2
1-4-23