Kyocera Mita KM-4530 Service Manual page 113

2BC/D
Maintenance
item No.
U241 Checking the operation of the switches of the finisher
Description
Displays the status of each switch of the optional document finisher.
Purpose
Used to check the operation of each switch of the optional document finisher.
Method
1. Press the start key to run the maintenance item.
2. Turn each switch ON manually.
* When a switch is detected to be in the ON position, the display for that switch will be highlighted.
Display
CONV
EJECT SUB
CONV TRAY
EJECT MAIN
TRAY U PAP
TRAY L PAP
MTRAY U LMT
MTRAY L LMT
MTRAY POS
MTRAY PUSH
MTRAY OVER1
MTRAY OVER2
MTRAY OVER3
JOB U LMT
JOB L LMT
JOB SAFETY
JOB POS
JOB OVER
JOB PAP1
JOB PAP2
JOB PAP3
JOB PAP4
JOB PAP5
SDL CONV
SDL EJECT
SDL PAP
SDL BIN PAP
Completion
Press the stop/clear key. The screen for selecting a maintenance item No. is displayed.
1-4-46
Description
Switches
Paper entry sensor (PES)
Paper ejection sensor (PEJS)
Intermediate tray paper conveying sensor (ITPCS)
Sub tray paper ejection sensor (STPES)
Upper paper sensor (PS-U)
Lower paper sensor (PS-L)
Main tray upper limit detection sensor (MTULDS)
Main tray lower limit detection sensor (MTLLDS)
Main tray paper upper surface detection light emitting/intercepting sensor
(MTPUSDLES/MTPUSDLIS)
Paper holder detection sensor (PHDS)
Main tray load 1000 detection sensor (MTLDS-10)
Main tray load 1500 detection sensor (MTLDS-15)
Main tray load 3000/2000 detection sensor (MTLDS-30/MTLDS-20)
Multi job tray upper limit detection sensor (MJTULDS)
Multi job tray lower limit detection sensor (MJTLLDS)
Multi job tray front/rear switch (MJTSW-F/MJTSW-R)
Multi job tray position sensor (MJPS)
Multi job tray paper upper surface detection light emitting/intercepting sensor
(MJTPUSDLES/MJTPUSDLIS)
Paper detection switch 1 (PDSW1)
Paper detection switch 2 (PDSW2)
Paper detection switch 3 (PDSW3)
Paper detection switch 4 (PDSW4)
Paper detection switch 5 (PDSW5)
Centerfold unit paper entry sensor (CUPES)
Eject switch (ESW)
Eject tray paper detection switch (ETPDSW)
Inside tray detection sensor (ITDS)