Commands
Command
Description
LVO?m
Returns the minimum and maximum range
of the vertical axis based on the last lens
calibration performed. The returned range is
persistent across AC cycles. (Read-only)
LVO <position>
Adjusts the vertical location of the lens to
the specified position. (Saved value)
Examples
Move the lens to position 500 on the vertical axis:
(LVO 500)
MSP–OSD Menu Position Presets
Sets the default menu position on the screen.
Commands
Command
Description
MSP?
Returns the current on-screen display position preset.
(Read-only)
MSP <value>
Changes the location of the on-screen display.
Examples
Get current menu position preset:
(MSP?)
Set the on-screen display position to the top left corner of the screen:
(MSP 0)
Christie TruLife+ Technical Reference–Serial Commands
020-103316-07 Rev. 1 (09-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
If printed, please recycle this document after use.
Serial API commands
Values
—
position = A numeric value subject to the
range returned in LVO?m
Values
—
0 = Top left (Default)
1 = Top center
2 = Top right
3 = Center left
4 = Center
5 = Center right
6 = Bottom left
7 = Bottom center
8 = Bottom right
45