Lvo- Lens Vertical Position Adjustment; Msp-Osd Menu Position Presets - Christie Crimson Technical Reference

LVO– Lens Vertical Position Adjustment
Sets the lens vertical location to an absolute position.
This command is only enabled when the projector is on.
Commands
Command Description
LVO <position> Adjusts the vertical location of the lens to
the specified position. This position is
persistent across AC cycles. (Saved value)
Examples
Move the lens to position 500 on the vertical axis:
(LVO 500)
MSP–OSD Menu Position Presets
Sets the default menu position on the screen.
Commands
Command Description
MSP? Returns the current on-screen display position preset.
(Read-only)
MSP <value> Changes the location of the on-screen display.
Examples
Get current menu position preset:
(MSP?)
Set the on-screen display position to the top left corner of the screen:
(MSP 0)
Crimson and Crimson Mirage Technical Reference–Serial Commands
020-102660-01 Rev. 1 (07-2018)
Copyright 2018 Christie Digital Systems USA, Inc. All rights reserved.
©
Serial API commands
Values
position = A numeric valuethat is subject to
the range returned in LVO?m
Values
—
0 = Top left (Default)
1 = Top center
2 = Top right
3 = Center left
4 = Center
5 = Center right
6 = Bottom left
7 = Bottom center
8 = Bottom right
39