Msp-Osd Menu Position Presets; Net-Network Setup - Christie Boxer 30 Technical Reference

Examples
Move the lens to position 500 on the vertical axis:
(LVO 500)
MSP–OSD Menu Position Presets
Sets the default menu position on the screen.
Commands
Command Description
MSP? Returns the current on-screen display position preset.
(Read-only)
MSP <value> Changes the location of the on-screen display.
Examples
Get current menu position preset:
(MSP?)
Set the on-screen display position to the top left corner of the screen:
(MSP 0)
NET–Network Setup
Modifies the network setup for this device.
By default, DHCP support is turned on.
Commands
Command
NET "<ip>" "<subnet>"
"<gateway>"
Boxer 30 Technical Reference–Serial API Commands
020-102096-08 Rev. 1 (08-2020)
Copyright © 2020 Christie Digital Systems USA, Inc. All rights reserved.
Description
Sets the projector network settings as specified. (Saved
value)
Serial API commands
Values
—
0 = Top left (Default)
1 = Top center
2 = Top right
3 = Center left
4 = Center
5 = Center right
6 = Bottom left
7 = Bottom center
8 = Bottom right
Values
All three arguments are
strings and the gateway is
optional.
47