Lvo-Lens Vertical Position Adjustment; Msp-Osd Menu Position Presets - Christie Mirage SST Technical Reference

LVO–Lens Vertical Position Adjustment
Sets the lens vertical location to an absolute position.
This command is only enabled when the projector is on.
Commands
Command Description
LVO?m Returns the minimum and maximum range
of the vertical axis based on the last lens
calibration performed. The returned range is
persistent across AC cycles. (Read-only)
LVO <position> Adjusts the vertical location of the lens to
the specified position. (Saved value)
This position is persistent across AC cycles.
Examples
Move the lens to position 500 on the vertical axis:
(LVO 500)
MSP–OSD Menu Position Presets
Sets the default menu position on the screen.
Commands
Command Description
MSP? Returns the current on-screen display position preset.
(Read-only)
MSP <value> Changes the location of the on-screen display.
Examples
Get current menu position preset:
Mirage SST Technical Reference–Serial Commands
020-103005-03 Rev. 1 (01-2021)
Copyright © 2021 Christie Digital Systems USA, Inc. All rights reserved.
Serial API commands
Values
—
position = A numeric valuethat is subject to
the range returned in LVO?m
Values
—
0 = Top left (Default)
1 = Top center
2 = Top right
3 = Center left
4 = Center
5 = Center right
6 = Bottom left
7 = Bottom center
8 = Bottom right
46