Table 2-15 Fsr Bit Field Descriptions; Figure 2-8 Fsr Format - ARM ARM926EJ-S Technical Reference Manual

31
ARM DDI0198D
The FSR accessed is determined by the value of the Opcode_2 field:
Opcode_2 = 0 Data Fault Status Register (DFSR).
Opcode_2 = 1 Instruction Fault Status Register (IFSR).
The fault type encoding is listed in Table 3-9 on page 3-22.
You can access the FSRs using the following instructions:
MRC p15, 0, <Rd>, c5, c0, 0 ;read DFSR
MCR p15, 0, <Rd>, c5, c0, 0 ;write DFSR
MRC p15, 0, <Rd>, c5, c0, 1 ;read IFSR
MCR p15, 0, <Rd>, c5, c0, 1 ;write IFSR
The format of the Fault Status Register is shown in Figure 2-8.
UNP/SBZ
Table 2-15 shows the bit field descriptions for the FSR.
Copyright © 2001-2003 ARM Limited. All rights reserved.
Bits Description
[31:9] UNP/SBZP.
[8] Always reads as zero. Writes ignored.
[7:4] Specifies which of the 16 domains (D15-D0) was being
accessed when a data fault occurred.
[3:0] Type of fault generated (see Table 2-16 on page 2-20).
Programmer's Model
9 8 7
0 Domain

Figure 2-8 FSR format

Table 2-15 FSR bit field descriptions

4 3 0
Status
2-19