Mazda RX-8 Workshop Manual page 2774

< Previous Next >
2011 - RX-8 - Restraints
DTC B1992, B1993, B1994, B1995
B1992 Driver–side side air bag module circuit short to power supply
B1993 Driver–side side air bag module circuit short to body ground
DTC
B1994 Driver–side side air bag module circuit resistance high
B1995 Driver–side side air bag module circuit resistance low
WARNING:
DETECTION
CONDITION
POSSIBLE
CAUSE
Detection conditions are for understanding the DTC outline before
performing an inspection. Performing an inspection according to only the
detection conditions may cause injury due to an operating error, or damage
the system. When performing an inspection, always follow the inspection
procedure.
Abnormal resistance (other than 1.4—3.2 ohms) detected in the driver-side
side air bag module circuit
Malfunction in the wiring harness between the driver-side side air bag
module and SAS control module
Driver-side side air bag module connector malfunction
Open or short circuit in the wiring harness between the driver-side side air
bag module and SAS control module
Driver-side side air bag module malfunction
SAS control module malfunction