Mazda RX-8 Workshop Manual page 2651

< Previous Next >
2011 - RX-8 - HVAC
AMBIENT TEMPERATURE SENSOR REMOVAL/INSTALLATION [FULL-AUTO AIR
CONDITIONER]
1. Disconnect the negative battery cable.
2. Remove the aerodynamic under cover. (See
REMOVAL/INSTALLATION.)
3. Remove in the order indicated in the table.
1Ambient temperature sensor connector
2Ambient temperature sensor
4. Install in the reverse order of removal.
< Previous Next >
© 2010 Mazda North American Operations, U.S.A.
AERODYNAMIC UNDER COVER
Back to Top