Mazda RX-8 Workshop Manual page 3238

< Previous Next >
2011 - RX-8 - Body and Accessories
KEYLESS ENTRY SYSTEM PRELIMINARY INSPECTION [KEYLESS ENTRY
SYSTEM]
Perform the following preliminary inspection before troubleshooting.
STEP
1 Is an after–market system installed?
2 Did the customer activate the keyless
entry system with the key inserted into
the steering lock?
3 The transmitter operation indicator
light (LED) illuminates when any
operation using the transmitter is
performed.
4 Visually inspect the transmitter battery
for the following:
(See
REPLACEMENT [WITH KEYLESS ENTRY
SYSTEM].)
INSPECTION
TRANSMITTER BATTERY
Battery direction
(polarity)
YesPerform troubleshooting according to
after–market keyless entry system
manual.
No Go to the next step.
YesGo to the next step.
No Explain to the customer
that the system does not
work with the key
inserted into the steering
lock.
Go to the next step.
YesGo to Step 8.
No Go to the next step.
Battery insertion
Yes
direction, battery type
problem:
Properly install the
battery or replace the
battery with a specified
one (CR1620), then go to
the next step.
ACTION