Mazda RX-8 Workshop Manual page 3194

2 Turn the ignition switch to the ON
position.
In automatic mode, pull up the
power window main switch for the
driver-side front door glass. The door
glass does not move up within
approx. 43 s after ignition switch
off.
Verify that driver-side front door
glass does not operate.
Does the driver-side front door glass
move up?
3 Turn the ignition switch to the ON
position.
Lower the driver-side front door glass
completely.
Take a hammer and hold it against
the inside of the top of the door glass
frame so that the door glass will hit
its handle when it is closing.
Raise the door glass using manual
mode.
When the door glass hits the
hammer handle, does it immediately
reverse and move down to approx.
200 mm {7.87 in} from the
completely closed position?
Yes Perform the driver-side
power window initialization
procedure, and
reinspect.(See
WINDOW INITIALIZATION
PROCEDURE.)
No Go to the next step.
YesGo to the next step.
No Perform the driver-side
power window initialization
procedure, and
reinspect.(See
WINDOW INITIALIZATION
PROCEDURE.)
normal,
replace
the power
window
main
switch,
and then
go to the
next step.
POWER
If
operation
is not
normal,
replace
the power
window
main
switch,
then go to
the next
step.
POWER
If
operation
is not
normal,
replace
the power
window
main
switch,
then go to
the next
step.