1 Navi Menu
Return to the Navigation Check Menu.
2 Gyro Voltage
Display the gyro sensor voltage
3 Relative bearingDisplay the gyro sensor relative bearing
4 Reset
Reset the following display items, and the display content to 0.
6. To stop the on-board diagnostic mode, turn the ignition switch to the LOCK position.
History
1. Turn ignition switch to ACC or ON position.
2. Launch the diagnostic mode. (See
NAVIGATION
SYSTEM].)
3. Select "Navigation Check".
4. Select "History".
5. Verify the displayed content.
No.
Name
1 Use Start Date
Gyro sensor voltage
Gyro sensor relative bearing
STARTING PROCEDURE FOR DIAGNOSTIC MODE [CAR-
Content/function
Display the date for the start of use.