Mazda RX-8 Workshop Manual page 2966

< Previous Next >
2011 - RX-8 - Body and Accessories
DTC B1134 [ADVANCED KEYLESS ENTRY AND START SYSTEM]
DTC B1134 Unprogrammed card key
POSSIBLE CAUSE
Diagnostic procedure
STEP
VERIFY NUMBER OF
1
REGISTERED CARD
KEYS
Using the M-MDS, perform
the PID/data monitor
inspection and confirm the
number of registered keys.
(See
TABLE [ADVANCED
KEYLESS ENTRY AND
START
Is card key registered?
INSPECT KEYLESS CONTROL MODULE
2
Turn the ignition switch to
the ON position.
Is the DTC displayed?
Unprogrammed card key.
Malfunction in the keyless control module internal circuit
INSPECTION
PID/DATA MONITOR
SYSTEM].)
M-MDS:
B1134
YesGo to the next step.
No Using the M-MDS, register a card
key if necessary.
(See CARD KEY ID CODE
REGISTRATION [WITH ADVANCED
KEYLESS ENTRY AND START
SYSTEM])
Go to the next step.
YesReplace the keyless control module and perform the
resetting procedure for the advanced keyless system
when replacing the keyless control module.
(See KEYLESS CONTROL MODULE
REMOVAL/INSTALLATION.)
(See CARD KEY ID CODE REGISTRATION [WITH
ADVANCED KEYLESS ENTRY AND START
(See STEERING LOCK UNIT ID CODE REGISTRATION
ACTION
SYSTEM])