If there is any malfunction, perform the off-vehicle inspection for TFT sensor.
(See
Transmission fluid temperature (TFT) sensor
ATF temperature (°C {°F}) Resistance (kilohm)
10 {50}
25 {77}
110 {230}
6. Connect the solenoid valve connector.
7. Connect the negative battery cable.
8. Install the battery cover.
9. Install the engine cover. (See
Off-Vehicle Inspection
WARNING:
A hot the transmission and ATF can cause severe burns. Turn off the engine and wait until
they are cool before replacing ATF.
1. Remove the TFT sensor. (See
REMOVAL/INSTALLATION
2. Place the TFT sensor and a thermometer in ATF as shown in the figure, and heat the ATF
Off-Vehicle
Inspection.)
Approx. 6.445
Approx. 3.500
Approx. 0.247
ENGINE COVER REMOVAL/INSTALLATION
TRANSMISSION FLUID TEMPERATURE (TFT) SENSOR
[SJ6A-EL].)
[13B-MSP].)