Mazda RX-8 Workshop Manual page 2638

< Previous Next >
2011 - RX-8 - HVAC
AIR MIX ACTUATOR REMOVAL/INSTALLATION [FULL-AUTO AIR CONDITIONER]
1. Disconnect the negative battery cable.
2. Remove the TCM. (AT) (See
3. Remove the A/C amplifier. (See
CONDITIONER].)
4. Remove in the order indicated in the table.
1Air mix actuator connector
2Air mix actuator
5. Install in the reverse order of removal.
< Previous Next >
TCM REMOVAL/INSTALLATION
A/C AMPLIFIER REMOVAL/INSTALLATION [FULL-AUTO AIR
© 2012 Mazda North American Operations, U.S.A.
[SJ6A-EL].)
Back to Top