Mazda RX-8 Workshop Manual page 2794

Diagnostic Procedure
STEP
INSPECT SEAT WEIGHT SENSOR CONTROL
1 MODULE CONNECTOR
WARNING:
Handling the air bag system
components improperly can
accidentally operate (deploy) the air
bag modules and pre-tensioner seat
belts, which may seriously injure you.
Read the service warnings and
cautions before handling the air bag
system components.
(See AIR BAG SYSTEM SERVICE
WARNINGS.)
(See AIR BAG SYSTEM SERVICE
CAUTIONS.)
Turn the ignition switch to the LOCK
position.
Disconnect the negative battery cable
and wait for 1 min or more.
Disconnect the seat weight sensor
control module connector.
Is there any malfunction of the seat
INSPECTION
YesRepair or replace the wiring harness.
After replacement, reperform the DTC inspection and verify
that no DTCs are displayed.
No Go to the next step.
ACTION