Mazda RX-8 Workshop Manual page 2861

< Previous Next >
2011 - RX-8 - Restraints
CURTAIN AIR BAG MODULE REMOVAL/INSTALLATION
WARNING:
Handling the air bag module improperly can accidentally deploy the air bag module, which
may seriously injure you. Read the service warnings and cautions before handling the air
bag module. (See
CAUTIONS.)
1. Turn the ignition switch to the LOCK position.
2. Disconnect the negative battery cable and wait for 1 min or more.
3. Remove the following parts:
a. A-pillar trim (See
b. Rear seat (See
c. Tire house trim (See
d. Rear pillar trim (See
e. Headliner (See
f. Head inpact pad (See
4. Remove in the order indicated in the table.
AIR BAG SYSTEM SERVICE
A-PILLAR TRIM REMOVAL/INSTALLATION.)
REAR SEAT REMOVAL/INSTALLATION.)
TIRE HOUSE TRIM
REAR PILLAR TRIM
HEADLINER REMOVAL/INSTALLATION.)
HEAD IMPACT PAD
WARNINGS.) (See
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
AIR BAG SYSTEM SERVICE