Boot Band Assembly Note
1. Crimp the boot band using the SST.
2. Verify that the crimping clearance A is within the specification.
If crimping clearance A exceeds the specification, reduce SST clearance, and crimp the boot band again.
If crimping clearance A is less than the specification, increase SST clearance, and crimp a new boot band.
Standard clearance A
2—3 mm {0.08—0.11 in}
3. Rotate the boot by hand and verify that it is securely installed to the boot band.
< Previous Next >
© 2010 Mazda North American Operations, U.S.A.
Back to Top