< Previous Next >
2011 - RX-8 - Body and Accessories
DTC B1342 [AUTO LIGHT/WIPER CONTROL MODULE]
DTC B1342
DETECTION CONDITION Auto light/wiper control module microcomputer malfunction
POSSIBLE CAUSE
Diagnostic procedure
STEP
PERFORM DTC INSPECTION
1
Clear DTCs using the M-MDS.
(See
LIGHT/WIPER CONTROL
Perform the auto light/wiper control
module DTC inspection using the M-
MDS.
(See
LIGHT/WIPER CONTROL
Is DTC B1342 displayed?
VERIFY THAT NO OTHER DTCs ARE PRESENT
2
Are there other DTCs output?
ECU is faulted
Auto light/wiper control module microcomputer malfunction
INSPECTION
CLEARING DTC [AUTO
MODULE].)
DTC INSPECTION [AUTO
MODULE].)
YesReplace the auto light/wiper control
module, then go to the next step.
(See
AUTO LIGHT/WIPER CONTROL
MODULE
REMOVAL/INSTALLATION.)
No Go to the next step.
YesPerform the corresponding DTC
inspection.
(See
DTC TABLE [AUTO LIGHT/WIPER
CONTROL
MODULE].)
No DTC troubleshooting completed.
ACTION