Mazda RX-8 Workshop Manual page 2755

< Previous Next >
2011 - RX-8 - Restraints
DTC B1881, B1882, B1883, B1886
B1881 Passenger-side pre-tensioner seat belt circuit resistance high
B1882 Passenger-side pre-tensioner seat belt circuit short to power supply
DTC
B1883 Passenger-side pre-tensioner seat belt circuit short to body ground
B1886 Passenger-side pre-tensioner seat belt circuit resistance low
WARNING:
DETECTION
CONDITION
POSSIBLE
CAUSE
Detection conditions are for understanding the DTC outline before performing an
inspection. Performing an inspection according to only the detection conditions
may cause injury due to an operating error, or damage the system. When
performing an inspection, always follow the inspection procedure.
Abnormal resistance (other than 1.5—3.1 ohms) detected in the passenger-side
pre-tensioner seat belt circuit
Malfunction in the wiring harness between the passenger-side pre-tensioner seat
belt and SAS control module
Passenger-side pre-tensioner seat belt connector malfunction
Open or short circuit in the wiring harness between the passenger-side pre-
tensioner seat belt and SAS control module
Passenger-side pre-tensioner seat belt malfunction
SAS control module malfunction