Mazda RX-8 Workshop Manual page 2880

3. Secure the curtain air bag module to the tire, by wrapping a wire (cross section 1.25 mm
2
in } or more) through the tire and the bolt installation holes at least 4 times as shown in the figure.
WARNING:
If the air bag module is not properly installed to the tire, serious injury may occur when
the module is operated (deployed). Make sure to install the air bag module securely.
4. Connect the SST (Adapter harness) to the curtain air bag module as shown in the figure.
5. Stack the tire with the curtain air bag module on top of two tires without wheels. Stack a tire without a
wheel on top of the tire with the curtain air bag module, and then stack another tire with a wheel on the
very top.
2
{0.002