Mazda RX-8 Workshop Manual page 2288

< Previous Next >
2011 - RX-8 - Transmission/Transaxle
TRANSMISSION FLUID TEMPERATURE (TFT) SENSOR INSPECTION [SJ6A-EL]
CAUTION:
Water or foreign material entering the connector can cause poor connections or corrosion.
Be sure that water or foreign material do not enter the connector when disconnecting it.
On-Vehicle Inspection
1. Remove the engine cover. (See
2. Remove the battery cover.
3. Disconnect the negative battery cable.
4. Disconnect the solenoid valve connector.
5. Measure resistance between the terminals A and B.
ENGINE COVER REMOVAL/INSTALLATION [13B-MSP].)