Mazda RX-8 Workshop Manual page 2418

(See Tie-rod End Disassembly
2Locknut
3Boot clamp
4Boot band
(See Boot Band Assembly
5Boot
6Tie rod
(See Tie Rod Disassembly
(See Tie Rod Assembly Note.)
7Lock washer
8Mounting rubber
(See Mounting Rubber Disassembly
(See Mounting Rubber Assembly
9Steering gear and linkage
Tie-rod End Disassembly Note
1. Place alignment marks as shown in the figure for proper installation.
2. Remove the tie-rod end.
Tie Rod Disassembly Note
1. Lock the steering rack end (pinion gear side) against rotation with a wrench.
Note.)
Note.)
Note.)
Note.)
Note.)