Mazda RX-8 Workshop Manual page 2884

7. Connect the SST (Deployment tool) to the battery. Connect the power supply red clip to the positive
battery terminal, and the black clip to the negative battery terminal.
8. Verify that the red lamp on the SST (Deployment tool) is illuminated.
9. Verify that all persons are standing at least 6 m {20 ft} away from the vehicle.
10. Press the activation switch on the SST (Deployment tool) to operate (deploy) the pre-tensioner seat
belt.
< Previous Next >
Back to Top
© 2010 Mazda North American Operations, U.S.A.