Mazda RX-8 Workshop Manual page 2648

< Previous Next >
2011 - RX-8 - HVAC
PASSENGER COMPARTMENT TEMPERATURE SENSOR REMOVAL/INSTALLATION
[FULL-AUTO AIR CONDITIONER]
1. Disconnect the negative battery cable.
2. Remove the driver's side lower panel. (See
3. Remove the order indicated in the table.
1Passenger compartment temperature sensor connector
2Passenger compartment temperature sensor
4. Install in the reverse order of removal.
< Previous Next >
© 2010 Mazda North American Operations, U.S.A.
LOWER PANEL REMOVAL/INSTALLATION.)
Back to Top