Mazda RX-8 Workshop Manual page 3107

5. Turn the audio OFF or the ignition switch to the LOCK position to stop the diagnostic assist
function.
Audio Amplifier Specification Inspection
1. With the audio power ON, press the POWER/VOLUME switch and simultaneously press the
SEEK/TRACK switch (down) for approx. 1 s.
2. Inspect according to the following table:
INSPECTION
Launch audio amplifier
specification inspection
mode.
Verify the audio
amplifier specification.
Dose the audio
amplifier specification
correspond.
3. Turn the audio OFF or the ignition switch to the LOCK position to stop the diagnostic assist
function.
INFORMATION DISPLAY
Without
Bose®
N
With
Bose®
L
If the antenna and
antenna feeder are
normal, replace the
audio unit.
ACTION
YesSystem is okay.
No Replace the audio unit.
(See CENTER PANEL UNIT
REMOVAL/INSTALLATION.)
(See CENTER PANEL UNIT
DISASSEMBLY/ASSEMBLY.)