Mazda RX-8 Workshop Manual page 2824

Disconnect the SST (Fuel and thermometer checker)
or the 2 ohms resistance.
No DTC troubleshooting
Connect the driver-side curtain air bag module
completed.
connector.
Connect the negative battery cable.
Turn the ignition switch to the ON position.
Clear DTCs using the M-MDS. (See CLEARING DTC.)
Perform the DTC inspection for the SAS control
module using the M-MDS. (See DTC DISPLAY.)
Is DTC B2773, B2774, B2775 and/or B2776 displayed
again?
< Previous Next >
Back to Top
© 2010 Mazda North American Operations, U.S.A.