Mazda RX-8 Workshop Manual page 3098

Meter, gauge
control status
3. Inspect the malfunctioning part.
Repair or replace if necessary.
4. Clear the DTC from the memory.
5. Turn the ignition switch to LOCK position then ON position.
6. Verify that the DTC U2064 is displayed using the M-MDS.
If DTC U2064 is displayed, go back to Step 1.
< Previous Next >
Brake system
warning light
AT warning light
EPS warning light
Keyless warning
light
Speedometer
Tachometer
Water temperature
gauge
© 2010 Mazda North American Operations, U.S.A.
— — × ×
— × — —
— — — —
— — — —
— — — —
— — — —
— — — —
— —
— —
× —
— ×
— —
— —
— —
Back to Top