Mazda RX-8 Workshop Manual page 2906

< Previous Next >
2011 - RX-8 - Restraints
CLOCK SPRING INSPECTION
1. Remove the driver-side air bag module.
(See DRIVER-SIDE AIR BAG MODULE
2. Remove the steering wheel.
(See STEERING WHEEL AND COLUMN
3. Remove the clock spring. (See
4. Verify continuity as indicated in the table.
If not as indicated in the table, replace the clock spring.
NOTE:
When the vehicle-side connector for the clock spring is disconnected, terminals 1A, 1B, 1C and 1D are shorted to prevent
unexpected operation (deployment) of the air bag module.
REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
CLOCK SPRING REMOVAL/INSTALLATION.)