Mazda RX-8 Workshop Manual page 2934

< Previous Next >
2011 - RX-8 - Restraints
LOCK RELEASE SOLENOID INSPECTION
1. Disconnect the negative battery cable.
2. Remove the rear door lower trim. (See
3. Disconnect the lock release solenoid connector.
4. Measure the resistance of the lock release solenoid individually.
If not within the specification, replace the front seat belt.
Standard
54—66 ohms
< Previous Next >
REAR DOOR LOWER TRIM
© 2010 Mazda North American Operations, U.S.A.
REMOVAL/INSTALLATION.)
Back to Top