Mazda RX-8 Workshop Manual page 2965

< Previous Next >
2011 - RX-8 - Body and Accessories
DTC B1342 [ADVANCED KEYLESS ENTRY AND START SYSTEM]
DTC B1342 Keyless control module internal malfunction
POSSIBLE CAUSE
Diagnostic procedure
STEP
INSPECT KEYLESS CONTROL
1 MODULE
Turn the ignition
switch to the ON
position.
Is the DTC displayed?
< Previous Next >
Malfunction in the keyless control module internal circuit
INSPECTION
M-
MDS:
B1342
© 2010 Mazda North American Operations, U.S.A.
YesReplace the keyless control module and perform the
resetting procedure for the advanced keyless system when
replacing the keyless control module.
(See KEYLESS CONTROL MODULE
REMOVAL/INSTALLATION.)
(See CARD KEY ID CODE REGISTRATION [WITH
ADVANCED KEYLESS ENTRY AND START
(See STEERING LOCK UNIT ID CODE REGISTRATION
[WITH ADVANCED KEYLESS ENTRY AND START
(See KEYLESS CONTROL MODULE
(See IMMOBILIZER SYSTEM-RELATED PARTS
PROGRAMMING [WITH ADVANCED KEYLESS ENTRY AND
START SYSTEM])
No DTC troubleshooting completed.
ACTION
SYSTEM])
CONFIGURATION)
SYSTEM])
Back to Top