Mazda RX-8 Workshop Manual page 2842

Is there continuity between terminal 2K of the
instrument cluster connector and ground?
CONFIRM THAT MALFUNCTION SYMPTOMS DO NOT RECUR
4
AFTER REPAIR
Switch the ignition to off.
Disconnect the negative battery cable and wait for 1
min or more.
Connect all disconnected SAS system connectors
during diagnosis.
Connect the negative battery cable.
Switch the ignition to on.
Does the air bag system warning light operate
properly?
< Previous Next >
© 2010 Mazda North American Operations, U.S.A.
next step.
(See INSTRUMENT
CLUSTER
REMOVAL/INSTALLATION)
YesComplete troubleshooting,
then explain repairs to
customer.
No Recheck malfunction
symptoms, then repeat
from Step 1 if malfunction
recurs.
Back to Top