Mazda RX-8 Workshop Manual page 2738

PSB_P_ST
(Passenger-side pre-tensioner seat
belt circuit status)
TRAK_SW
(Seat track position sensor state)
*1
Used during seat weight sensor calibration setting. Not necessary for diagnostic.
*2
When the calibration error is displayed, the error can be cleared by turning the ignition
switch to the LOCK position.
< Previous Next >
SHRT_B+/
SHRT_GND/
OPEN/
SQ_LOWRES/
Normal
Forward/Rearward
© 2010 Mazda North American Operations, U.S.A.
Related wiring harness
short to power supply:
SHRT_B+
Related wiring harness
short to ground:
SHRT_GND
Related wiring harness
circuit open: OPEN
Pre-tensioner seat belt
circuit resistance low:
SQ_LOWRES
Related wiring harness
normal: Normal
Front seat front position:
Forward
Front seat rear position:
Rearward
2G, 2J
2W, 2X
Back to Top