Mazda RX-8 Workshop Manual page 3024

keyless control module or the
PCM, or both?
2 VERIFY DTC
Using the registered key, turn
the ignition switch to the ON
position.
Is the DTC displayed?
< Previous Next >
SECURITY
LIGHT: 16
M-MDS: U2510
or U1147/P1260
© 2010 Mazda North American Operations, U.S.A.
No Replace the keyless control module and perform
procedures for when replacing the keyless
control module only.
(See KEYLESS CONTROL MODULE
REMOVAL/INSTALLATION.)
(See IMMOBILIZER SYSTEM-RELATED PARTS
PROGRAMMING [WITH KEYLESS ENTRY
SYSTEM].)
(See IMMOBILIZER SYSTEM-RELATED PARTS
PROGRAMMING [WITH ADVANCED KEYLESS
ENTRY AND START
Go to the next step.
YesReplace the PCM and perform procedures for
when replacing the PCM only.
(See PCM REMOVAL/INSTALLATION [13B-
MSP].)
(See IMMOBILIZER SYSTEM-RELATED PARTS
PROGRAMMING [WITH KEYLESS ENTRY
SYSTEM].)
(See IMMOBILIZER SYSTEM-RELATED PARTS
PROGRAMMING [WITH ADVANCED KEYLESS
ENTRY AND START
No DTC troubleshooting completed.
SYSTEM].)
SYSTEM].)
Back to Top