Mazda RX-8 Workshop Manual page 2839

< Previous Next >
2011 - RX-8 - Restraints
DTC B1017
DTC B1017 Deployment prohibited because configuration is not set
WARNING:
DETECTION
CONDITION
POSSIBLE
CAUSE
Diagnostic procedure
CONFIGRATION
Using the M–MDS, perform SAS control
module configuration.
Is DTC B1017 displayed?
< Previous Next >
Detection conditions are for understanding the DTC outline before
performing an inspection. Performing an inspection with only detection
conditions may cause injury due to an operating error, or damage the
system. When performing an inspection, always follow the inspection
procedure.
SAS control module configuration has not been set
SAS control module configuration has not been set
SAS control module malfunction
INSPECTION
© 2010 Mazda North American Operations, U.S.A.
YesReplace the SAS control module.
(See SAS CONTROL MODULE
REMOVAL/INSTALLATION.)
No DTC troubleshooting completed.
ACTION
Back to Top