5. Remove the A/C unit as shown in the figure.
6. Install in the reverse order of removal.
7. Inspect for engine coolant leakage. (See
MSP].)
8. Perform the refrigerant system performance test. (See
TEST.)
A/C Unit Installation Note
1. When installing a new A/C unit or evaporator, add compressor oil to the refrigerant cycle.
Supplemental amount (approx. quantity)
20 ml {20 cc, 0.7 fl oz}
< Previous Next >
ENGINE COOLANT LEAKAGE INSPECTION [13B-
© 2010 Mazda North American Operations, U.S.A.
REFRIGERANT SYSTEM PERFORMANCE
Back to Top