Mazda RX-8 Workshop Manual page 3239

Is there any malfunction?
5 Does the keyless entry system operate
properly?
6 NOTE:
Use a new monitor battery (normal
battery) or one from another vehicle
which operates normally.
Replace the battery in all the
transmitters with a monitor-use
battery (normal battery).
(See TRANSMITTER BATTERY
REPLACEMENT [WITH KEYLESS ENTRY
SYSTEM].)
For each transmitter, verify that the
transmitter operation indicator light
(LED) illuminates when a button is
operated.
Does operation indicator light (LED)
for each transmitter operate?
7 NOTE:
Inspect for all transmitters.
Inspect while the batteries for all of
the transmitters are replaced with
monitor-use batteries (normal battery).
Verify the operation of keyless entry
system using all of the transmitters.
Does the keyless entry system operate
normally?
Battery type (CR1620)
Corrosion, soiling,
deformation of
battery terminals
(plus/minus terminals)
Contact malfunction
between the battery
terminal and battery
when battery is
inserted
Battery terminal
malfunction:
Clean corrosion and
soiling or repair the
terminal, then go to the
next step.
No Go to Step 8.
YesGo to Step 9.
No Go to the next step.
YesGo to the next step.
No If the operation indicator light (LED) does
not illuminate, replace the transmitter,
then go to Step 11.
YesReplace the battery, then go to Step 11.
(See TRANSMITTER BATTERY
REPLACEMENT [WITH KEYLESS ENTRY
SYSTEM].)
No Go to the next step.