Mazda RX-8 Workshop Manual page 2564

< Previous Next >
2011 - RX-8 - HVAC
REFRIGERANT SYSTEM GENERAL PROCEDURES
Manifold Gauge Set Installation
1. Fully close the valves of the manifold gauge.
2. Connect the charging hoses to the high/low pressure side joints of the manifold gauge.
3. Connect the quick couplers to the ends of the charging hoses.
4. Connect the quick couplers to the charging valves.
< Previous Next >
© 2010 Mazda North American Operations, U.S.A.
Back to Top