11. Install in the reverse order of removal.
12. Perform the refrigerant system performance test. (See
Refrigerant Line Removal Note
Block joint type
1. Disconnect the block joint type pipes by grasping the female side of the block with pliers or similar tool and holding
firmly, and then remove the connection bolt or nut.
Quick joint type
1. Install the SST (49 N061 001) to the arrow side of the clamp.
2. Push the SST (49 N061 001) with your thumb until it snaps into the clamp.
CAUTION:
Excessive force to the SST (49 N061 001) may damage the clamp. Be careful not to press hard when
inserting the SST (49 N061 001) into the clamp.
REFRIGERANT SYSTEM PERFORMANCE
TEST.)