Mazda RX-8 Workshop Manual page 3217

2 Inspect the operation of the door
glass by repeating Step 1 above.
Does the door glass stop before
fully opening/closing while in
auto operation?
3 Open the door glass by operating
the transmitter.
Does the door glass stop before
fully opening?
4 Close the door glass by operating
the transmitter.
Does the door glass stop before
fully closing?
Power window motor (See
POWER WINDOW MOTOR
INSPECTION.)
Battery (Low voltage)
Door glass (Installation
condition)
No Go to the next step.
YesPerform the power window initialization
procedure.
(See POWER WINDOW INITIALIZATION
PROCEDURE.)
No Go to the next step.
YesInspect the following parts, and repair or
replace.
(Advanced keyless system)
Door lock control module
(See DOOR LOCK CONTROL
MODULE INSPECTION [WITH
ADVANCED KEYLESS ENTRY
AND START
(Keyless entry system)
keyless control module
(See KEYLESS CONTROL
MODULE INSPECTION
[WITHOUT ADVANCED KEYLESS
ENTRY AND START SYSTEM
No Go to the next step.
YesInspect the following parts, and repair or
replace.
(Advanced keyless system)
Door lock control module
(Vehicle with advanced keyless
system)
(See DOOR LOCK CONTROL
SYSTEM].)
].)