Diagnostic Procedure
Step
INSPECT PASSENGER-SIDE AIR BAG MODULE (INFLATOR
1
NO.2) CONNECTOR
WARNING:
Handling the component parts improperly can
accidentally operate (deploy) the air bag module,
which may seriously injure you. Read the service
warnings/cautions and the workshop manual before
handling the air bag system components.
(See
(See
Turn the ignition switch to the LOCK position.
Disconnect the negative battery cable and wait for 1
min or more.
Remove the glove compartment. (See
COMPARTMENT
Disconnect the passenger-side air bag module (inflator
No.2) connector. (See
MODULE
Inspect the passenger-side air bag module (inflator
Inspection
AIR BAG SYSTEM SERVICE
AIR BAG SYSTEM SERVICE
REMOVAL/INSTALLATION.)
PASSENGER-SIDE AIR BAG
REMOVAL/INSTALLATION.)
WARNINGS.)
CAUTIONS.)
GLOVE
Action
YesReplace the passenger-
side air bag module wiring
harness.
No Go to the next step.