Mazda RX-8 Workshop Manual page 2840

< Previous Next >
2011 - RX-8 - Restraints
NO.1 AIR BAG SYSTEM WARNING LIGHT DOES NOT ILLUMINATE
1 Air bag system warning light does not illuminate
Air bag system warning light does not illuminate while the air bag system is performing
DESCRIPTION
initialization.
POSSIBLE
CAUSE
Diagnostic Procedure
When performing an asterisked (*) troubleshooting inspection, slightly shake the wiring
harness and connectors while performing the inspection to discover whether poor contact
points are the cause of any intermittent malfunction. If there is a problem, verify that
connectors, terminals and wiring harness are connected correctly and undamaged.
STEP
INSPECT OTHER WARNING AND INDICATOR LIGHTS CIRCUIT
1
IN INSTRUMENT CLUSTER
Switch the ignition to on.
Do other warning and indicator lights illuminate?
INSPECT SAS CONTROL MODULE
2
SAS control module malfunction
Instrument cluster (circuit board) malfunction
Short to ground circuit in wiring harness between instrument cluster and
SAS control module
INSPECTION ACTION
YesTurn the ignition switch to
the LOCK position, then
go to the next step.
No Inspect instrument cluster
power supply system and
ground system the, then
go to Step 4.
YesReplace the SAS control