< Previous Next >
2011 - RX-8 - Transmission/Transaxle
SELECTOR LEVER COMPONENT INSPECTION
1. Remove the engine cover. (See
2. Remove the battery cover.
3. Disconnect the negative battery cable.
4. Remove the ashtray. (See
5. Remove the shift knob. (See
6. Remove the console panel and indicator assembly. (See
REMOVAL/INSTALLATION.)
7. Disconnect the selector lever component connector.
8. Verify continuity as indicated in the table.
If there is any malfunction, replace the selector lever. (See
REMOVAL/INSTALLATION.)
ENGINE COVER REMOVAL/INSTALLATION
CONSOLE
REMOVAL/INSTALLATION.)
SELECTOR LEVER
REMOVAL/INSTALLATION.)
SELECTOR LEVER
SELECTOR LEVER
[13B-MSP].)