Turn ignition switch to ON position.
Set fan switch to 4th position.
Does air intake mode
(RECIRCULATE, FRESH) change
smoothly when air intake link is
operated by hand?
7 INSPECT AIR INTAKE ACTUATOR
Inspect air intake actuator.
(See
INSPECTION [MANUAL AIR
CONDITIONER].)
Is it normal?
8 INSPECT AIR INTAKE SELECTOR SWITCH AND
DEFROSTER SWITCH IN A/C AMPLIFIER
Test voltage at A/C amplifier
connector (24-pin) terminals 1I and
1J.
Is it normal?
9* INSPECT WIRING HARNESS BETWEEN A/C
AMPLIFIER AND AIR INTAKE ACTUATOR FOR
CONTINUITY
Turn ignition switch to LOCK
position.
Is there continuity between the
following A/C amplifier connector
(24-pin) terminals and air intake
actuator connector terminals?
10* INSPECT WIRING HARNESS BETWEEN A/C
AMPLIFIER AND AIR INTAKE ACTUATOR FOR
SHORT TO GROUND
AIR INTAKE ACTUATOR
Terminal 1I—
Terminal A (FRESH
signal)
Terminal 1J—
Terminal C
(RECIRCULATE
signal)
YesGo to next step.
No Replace air intake actuator, go to Step 14.
(See
AIR INTAKE ACTUATOR
REMOVAL/INSTALLATION [MANUAL AIR
CONDITIONER].)
YesGo to next step.
No Replace A/C amplifier, then go to Step 14.
YesGo to next step.
No Repair wiring harness between A/C amplifier
and air intake actuator, then go to Step 14.
YesRepair wiring harness between A/C amplifier
and air intake actuator, then go to Step 14.