Mazda RX-8 Workshop Manual page 3115

< Previous Next >
2011 - RX-8 - Body and Accessories
SUPPLIER IDENTIFICATION PROCEDURE [CAR-NAVIGATION SYSTEM]
NOTE:
The supplier can vary with the module. When asking the supplier (service center) for repair
or replacement, identify the supplier and fill in the Audio Repair Order Form with the
following procedures.
Identification Using the Label or Inscribed Lettering
1. Disconnect the negative battery cable.
2. Remove the following parts:
a. Shift lever knob (MT) (See
b. Shift knob (AT) (See
c. Upper panel (See
d. Ashtray panel (See
e. Lower panel (See
f. Knee bolster (See
3. Verify the supplier by referring to the label attached to each unit.
TRANSMISSION REMOVAL/INSTALLATION
SELECTOR LEVER
CONSOLE REMOVAL/INSTALLATION.)
CONSOLE REMOVAL/INSTALLATION.)
LOWER PANEL REMOVAL/INSTALLATION.)
KNEE BOLSTER REMOVAL/INSTALLATION.)
REMOVAL/INSTALLATION.)
[P66M-D].)