Mazda RX-8 Workshop Manual page 2743

< Previous Next >
2011 - RX-8 - Restraints
DTC B1342
DTC B1342 SAS control module (DTC 12 detection circuit malfunction)
WARNING:
DETECTION
CONDITION
POSSIBLE
CAUSE
Diagnostic Procedure
Step
PERFORM SAS CONTROL MODULE
1 INSPECTION
Perform the configuration for the
SAS control module using the M-
MDS.
(See
CONFIGURATION.)
Clear DTCs using the M-MDS.
(See
Inspect the SAS control module
DTCs.
Detection conditions are for understanding the DTC outline before
performing an inspection. Performing an inspection according to only the
detection conditions may cause injury due to an operating error, or damage
the system. When performing an inspection, always follow the inspection
procedure.
SAS control module configuration has not been performed.
Malfunction in the SAS control module internal circuit
SAS control module malfunction
No SAS control module configuration
Inspection
SAS CONTROL MODULE
CLEARING DTC.)
YesPerform the SAS control module configuration
again, then go to the next step.
(See SAS CONTROL MODULE
CONFIGURATION.)
No Go to the next step.
Action