Mazda RX-8 Workshop Manual page 3247

Measure the voltage at keyless
control module connector
terminals 1C, 1D and 1F.
Is the voltage as above?
11 REINSPECT MALFUNCTION SYMPTOM
AFTER REPAIR
Does the keyless entry system
operate properly?
< Previous Next >
All doors
locked: Cycles
1.0 V or less
→B+→1.0 V
or less
(terminal 1D)
All doors
unlocked:
Cycles
B+→1.0 V or
less→B+
(terminal 1C)
All doors super
locked:1.0 V or
less→B+→1.0
V or less
(terminal 1F)
© 2010 Mazda North American Operations, U.S.A.
No Inspect the keyless control
module the connector.
Inspect the wiring harness
between the keyless control
module and door lock actuator.
YesTroubleshooting completed.
Explain repairs to customer.
No Reinspect the malfunction symptoms, then
repeat from Step 1 if malfunction recurs.
If the above
parts are
normal, go to
the next step.
If any of
above parts
are
malfunctioning,
repair the
malfunctioning
part.
Back to Top