Mazda RX-8 Workshop Manual page 2788

< Previous Next >
2011 - RX-8 - Restraints
DTC B2229, B2231, B2233, B2235
B2229 Passenger–side air bag module (inflator No.2) circuit short to body ground
B2231 Passenger–side air bag module (inflator No.2) circuit short to power supply
DTC
B2233 Passenger–side air bag module (inflator No.2) circuit resistance high
B2235 Passenger–side air bag module (inflator No.2) circuit resistance low
WARNING:
DETECTION
CONDITION
POSSIBLE
CAUSE
Detection conditions are for understanding the DTC outline before
performing an inspection. Performing an inspection according to only the
detection conditions may cause injury due to an operating error, or damage
the system. When performing an inspection, always follow the inspection
procedure.
Abnormal resistance (other than 1.4—2.9 ohms) detected in the
passenger-side side side air bag module circuit
Malfunction in the wiring harness between the passenger-side air bag
module (inflator No.2) and SAS control module
Passenger-side air bag module (inflator No.2) connector malfunction
Open or short circuit in the wiring harness between the passenger-side air
bag module (inflator No.2) and SAS control module
Passenger-side air bag module (inflator No.2) malfunction
SAS control module malfunction